Ham Radio EMCOMM Go Kit – HF

HF Kit (1)After some thought I decided that I wanted to treat this as more of a HF Field Kit than a true Go Kit. I had heard good things about the Yaesu FT-450D and after seeing sale prices and mail-in rebates drop the price to $600 I decided to buy one. The Yaesu (9”W x 3.3”H x 8.5”D, 8.8 lbs) is not as compact as some HF rigs, but it is nowhere near as unwieldy as my Kenwood TS-590SG  (10.6″W × 3.8″H × 11.5″D, 16.3 lbs) which serves as my main HF transceiver in my station. For such a compact radio it contains many comparable features to my larger and considerably more expensive Kenwood.

Features

The Yaesu 450D is an entry level transceiver, however, it includes a lot of features that give you considerable bang for your buck.

  • HF/6M Coverage
  • 100W Transmitter
  • IF DSP Filtering (Width, Shift, Contour, Notch, Noise Reduction, etc.)
  • Backlit Buttons (perfect for field use at night)
  • Voice Keyer (perfect for contesting and Field Day)
  • Built-in Antenna Tuner

Field Case

HF Kit (2)To house the Yaesu I used a Monoprice 22″ x 14″ x 8″ Weatherproof Hard Case. This should keep the radio, SignaLink, and microphone secure. Less damage prone items like the power cable can be transported in my backpack. For additional capability I decided to add a second case to the kit.

Accessory Case

This case is the same model used to house the Yaesu 450D. In this case it contains my Manual Antenna Tuner, a MFJ 4125P 22A switching power supply, and a MFJ 822 cross-needle SWR Meter. This case greatly expands the capabilities of my HF kit. The manual tuner has a much wider tuning range than the autotuner inside the 450D, the switching power supply allows me to power the radio from line or generator power if available, and the small SWR meter is perfect for station monitoring in the field.

When line or generator power is not available I will rely on my Go Kit Battery Box. I think that this setup will prove to be versatile and the Yaesu 450D provides many modern conveniences as well as 100W output in a compact package.

Leave a Reply

Your email address will not be published. Required fields are marked *